FAB-0721

RP-0621

RESTRICTION ORIFICE PLATES

Standard Bore

A Restriction Ori ce Plate is a device used to restrict ow. It reduces ow and pressure from the upstream side to the downstream side. This is bene cial in order to reduce noise and protect downstream equipment.

Model

Material

RP 21 CS RP 21 SS

Carbon Steel Stainless Steel

Multi-Hole Bore

Materials Standard materials for ori ce plates are stainless steel and carbon steel. Contact factory for additional materials such as ceramic, berglass reinforced plastic, duplex stainless steel, etc. Bore Diameter Sizing of the restriction ori ce is speci ed by the customer in order to meet speci c application requirements. For reference, see below for common design options. Codes & Standards Currently, there are no corresponding codes or standards that address Restriction Ori ce Plates. Handles Ori ce plates can be ordered with or without a handle. Handles are generally 1”wide by 5” long. Additional Design Options Restriction Ori ce plates can have a variety of speci cations. Bores can be placed concentrically or eccentrically with the pipe and can have a full or segmented opening.

Eccentric Bore

RP 21 Restriction Ori ce Plate

Illustration represents a Titan FCI Ori ce Plates. Titan FCI’s fabricated products are made to each customer’s unique speci cations, and therefore, illustrations may not be accurate for all ori ce plates. All materials, illustrations, and product details referenced in this literature are general in nature. Some options may not be available in all sizes and/or models. Titan FCI reserves the right to make design and speci cation changes to improve the products without prior noti cation. For exact product speci cations, please consult the Titan FCI factory and request certi ed engineering drawings.

Bore Ø To Be Specified by Purchaser

Ø=½”

Multi-Stage Restriction Plate Assembly

B

ØA

All pictures shown are for illustrative purposes only. Actual product may vary due to product enhancement.

Tel: 910-735-0000 • Fax: 910-738-3848 • titan@titanfci.com 290 Corporate Drive • PO Box 7408 • Lumberton, NC 28358

TITAN

www.titanfci.com

TITAN FLOW CONTROL, INC

27