TITAN FLOW CONTROL CATALOG - 0724

CV31GUL-0423

• SWING CHECKVALVE • SINGLE DISC • GROOVED ENDS MODEL: CV 31G-UL-DI (Ductile Iron Body) EPDM Seat • Stainless Steel Disc

TITAN ® FLOW CONTROL, Inc. 290 Corporate Drive E-mail: titan@titanfci.com Lumberton, NC 28358 Web: www.titanfci.com Tel: 910.735.0000 Fax: 910.738.3848

WOG 300

TITAN

BILL OF MATERIALS (1)

No.

PART

CV 31G-UL-DI

3

11

12

13 4

1 2 3 4 5 6 7 8 9

Body

Ductile Iron ASTMA536 Stainless Steel Type 304

Disc (2)

Disc Sealing Ring (2) EPDM

6

Seat Ring (2)

Stainless Steel Type 304

5

Hinge Pin Spring (2)

AISI 420 AISI 304 AISI 304

2

1

7

Bushing

Plug

Malleable Galvanized Iron Malleable Galvanized Iron Malleable Galvanized Iron

DP tap Plug Drain Plug

B

8

10 11 12

Washer

AISI 304 AISI 304

9

Bolt Nut

D C

A

13 AISI 304 1. Bill of Materials represents standard materials. Equivalent or better materials may be substituted at the manufacturer's discretion. 2. Denotes recommended spare parts.

10

Ductile Iron Application Notes: Ductile Iron maintains the anti- corrosive properties of Cast Iron while achieving a yield strength comparable to Carbon Steel. Illustrations are representative of the CV 31G-UL-DI Please request certified drawings when required.

DIMENSIONS AND PERFORMANCE DATA (1)

2 2 1 / 2

3

4

5

6

8

10

12

in

SIZE

mm 50

65

80 100 125 150 200 250 300

in

6.75

7.25 184 2.87

7.75 197 3.50

8.25 210 4.50 114

9.75 12.75 14.61 18.00 21.06

A DIMENSION FACE TO FACE (2) Ø B DIMENSION OVERALL DIAMETER

mm 171

248 5.56 141

324 6.63 168

371

457

535

in

2.37

8.63 10.75 12.75

mm 60

73

89

219 1/2

273 1/2

324 1/2

in

3/8

3/8

3/8

1/2

1/2

1/2

C NPT Plug DP TAPS D NPT Plug BLOW-OFF

mm 10

10

10

15

15

15

15

15

15

in

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

mm 15

15

15

15

15

15

15 60

15

15

lb

7.25

8.00

10.3

16 21.75

35.6

115

167

ASSEMBLED WEIGHT

kg

3.3

3.6

4.7

7.3

9.9

16.2

27.2

52

75.7

112

140

250

390

700 1000 1800 3000 4200

Flow Coefficient

C v psi

Cracking Pressure (3)

≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25 ≤ .25

1. Dimensions, weights, and flow coefficients are for reference only. When required, request certified drawings. 2. Face to face values have a tolerance of ±0.06 in (±2.0 mm) for sizes 10" and lower and a tolerance of ±0.12 in (±3.0 mm) for 12” sizes. 3. Cracking pressure is for horizontal installations only. For vertical installations, please consult factory. PRESSURE-TEMPERATURE RATINGS

REFERENCED STANDARDS & CODES

CODE

DESCRIPTION

2” ~ 12” A536 65-45-12

320

AWWA C606

Grooved and Shouldered Joints Valve Inspection and Testing Standard Marking System for Valves

API 598

300

MSS SP-25 MSS SP-55

Quality Standard for Valve Castings ANSI/CAN/UL/ULC 312 CheckValves for Fire Protection. FM 1210 Swing check.

280

260

Pressure (PSI)

SEATAND SPRINGTEMPERATURE RATINGS (2)

SEAT EPDM

Temperature Range

240

-40 -20 0

20 40 60 80 100 120 140 160 180 200 220

-20 °F ~ 250 °F

Temperature (F)

SPRING

MaximumTemperature

Series 300 Stainless Steel 450 °F 1. The listed pressure and temperature ratings for the valve's body, seat, and spring are theoretical and may vary during actual operating conditions. 2. Max and min temperatures are for reference only. Prolonged use at these temperatures is not recommended for optimal service life.

PRESSURE/ TEMPERATURE RATING (1)

Pressure Class WOG (Non-shock)

Ductile Iron A536 300 PSI @ 100 °F

As † Titan product changes occur, there may be short-term differences between actual product specifications and the information contained within our literature. † Titan FCI reserves the right to make design and specification changes to improve our products without prior notification. When required, request certified drawings. † TITAN is a registered trademark of Titan Flow Control Incorporated.