TITAN FLOW CONTROL CATALOG - 1019

SIMPLEX BASKET STRAINER f RF FLANGED &THREADED ASME CLASS 150/300 f CARBON AND STAINLESS STEEL BS3535F-0816

TITAN

TITAN FLOW CONTROL, INC.

(CARBON STEEL - THREADED - 150/300) B (CARBON STEEL - RF FLANGED - 150) B (STAINLESS STEEL - THREADED - 150/300) B (STAINLESS STEEL - RF FLANGED - 150) BS 35-CS S 35F-CS S 35-SS S 35F-SS

MODELS:

• Quick-opening cover designs are available. Quick-opening, two bolt cover option is rated at 150 psi.

A APPLICATIONS F FEATURES s

SIZE RANGE: THREADED: 3/8" ~ 3" FLANGED: 1" ~ 8"

T TECHNICAL

high quality construction the series bs 35 b asket strainer is available in carbon or stainless steel with either threaded or flanged ( rf ) end connections . it features a machined groove that encapsulates the cover gasket and aids in preventing gasket blow - outs . s minimal pressure loss pressure loss is minimized by providing an over - the - top flow path and large straining area . the straining capacity is a minimum of six times that of the cross sectional area of the connecting pipe . s large straining capacity with its large body and sizeable straining element , the series bs 35 b asket strainer can store large amounts of debris - thus maximizing time between servicing . it also features a machined seat with o - ring that enables fine filtrations - down to 40 microns . s numerous straining element options straining elements are available in a variety of perforations , meshes , and materials . special designs are also available including magnetic , wedge wire , drilled perforations , and pleated straining elements . the standard material for straining elements is type 304 stainless steel . s self - cleaning option

PRESSURE/ TEMPERATURE RATING CS - ASTMA216 GR.WCB - CLASS 150

WOG (Non-shock) : 285 PSI @ 100 °F

PRESSURE/ TEMPERATURE RATING SS - ASTMA351 GR. CF8M - CLASS 150

WOG (Non-shock) : 275 PSI @ 100 °F

PRESSURE/ TEMPERATURE RATING CS - ASTMA216 GR.WCB - CLASS 300

WOG (Non-shock) : 740 PSI @ 100 °F

PRESSURE/ TEMPERATURE RATING SS - ASTMA351 GR. CF8M - CLASS 300

WOG (Non-shock) : 720 PSI @ 100 °F

utilizing a modified straining element , the bottom drain can be fitted with a titan fci b all valve to allow for the automatic cleaning or flushing of the straining element while keeping the pipeline in service .

markets : water & wastewater , pulp & paper , chemical & petrochemical , petroleum , oil & gas , transportation , marine industry , and food industry general application : simplex basket strainers are installed into a pipeline system to remove unwanted debris from the pipeline flow . basket strainers are commonly used in horizontal pipelines where debris loading is high and the collection of solids is required . straining is accomplished via a perforated or mesh lined straining element , internal to the basket strainer . in general , the size of the perforation or mesh should be slightly smaller than the smallest debris particle to be removed . it is important to note that the correct size of a basket strainer is determined by its job function , not by the size of the pipeline .

The above data represents common market and service applications. No representation or guarantee, expressed or implied, is given due to the numerous variations of concentrations, temperatures and flow conditions that may occur during actual service.

YOUR PIPELINE TO THE FUTURE! TITAN FLOW CONTROL, INC.

Fax: 910-738-3848 s titan@titanfci.com s www.titanfci.com

Tel: 910-735-0000 s

PO Box 7408 s

Lumberton, NC 28358

290 Corporate Drive s